Factory Promotional Aflas O-Ring for Zurich Manufacturer
Factory Promotional Aflas O-Ring for Zurich Manufacturer Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
| Properties | Units | Typical value |
| Hardness | IRHD | 84 |
| Tensile strength | MPa | 22 |
| Elongation at break | % | 189 |
| Modulus at50% elongation | MPa | 4 |
| Modulus at100% elongation | MPa | 12 |
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Factory Promotional Aflas O-Ring for Zurich Manufacturer, The product will supply to all over the world, such as: , , ,
ROONG KHONG AMIANG LÀM KÍN, RONG CHỊU NHIỆT ĐỘ CAO, GIOĂNG CHỊU NHIỆT Phan Thanh Tùng (Sales Engineer) – Mobile: 0902.357.725 …
How to re-caulk a inground pool deck. Removing the old caulk, I used a 5-1 painters knife. The backer rod/ caulk saver foam was from Lowes (in the weather strip area) and the size I used was 5/8″ (will vary based on crack size) . The caulk also came from Lowes in the concrete section. Some small areas did leak through causing a hole or gap. the next day I skimmed a little latex caulk over the hole then after it dried added another coat of the self leveling caulk to cover the latex caulk.
By from -
By from -
