2017 New Style PTFE Gasket to Zimbabwe Manufacturers

Short Description:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material. Technical Data Sheet Property Unit Result Density g/cm3 2.18 Elongation at Break % 200~450 Tensile Strength Mpa 14~18 Bending Strength Mpa No Break Pressure Resistance Mpa 24 Tensile Modulus Mpa 393 Bending Modulus ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2017 New Style PTFE Gasket to Zimbabwe Manufacturers Detail:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Property Unit Result
Density g/cm3 2.18
Elongation at Break % 200~450
Tensile Strength Mpa 14~18
Bending Strength Mpa No Break
Pressure Resistance Mpa 24
Tensile Modulus Mpa 393
Bending Modulus Mpa 490~586
Working Temperature

(20000 hr, highest)

260

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.


Product detail pictures:

2017 New Style
 PTFE Gasket to Zimbabwe Manufacturers detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket

2017 New Style PTFE Gasket to Zimbabwe Manufacturers, The product will supply to all over the world, such as: , , ,


  • Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.

    The temperature and pressure relief valve (T&P) is an important safety feature that prevents pressure from building up that could damage the water heater and even your home. Over time, corrosion can cause the T&P valve to no longer function as it should. To determine if your T&P valve is working properly, open the valve with your hand by pulling up the lever as shown in the video. When pulling up on this lever, you should hear pressure escape the valve. If it doesn’t pass that simple test, it’s time to replace the valve.

    This video shows detailed step-by-step procedure for how to replace a T&P valve on a gas or electric hot water heater.

    Tools you’ll need
    Replacement T&P Valve
    Pipe wrench or adjustable wrench
    Extension or Cheater bar
    Pipe sealer or Teflon Tape
    Garden hose
    Rags or Towels

    WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.


    5 Stars By from -

    5 Stars By from -

    Related Products