2017 High quality Spiral Wound Gasket-R for Azerbaijan Manufacturers

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2017 High quality Spiral Wound Gasket-R for Azerbaijan Manufacturers Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

gg

echnical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

 Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

2017 High quality
 Spiral Wound Gasket-R for Azerbaijan Manufacturers detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket

2017 High quality Spiral Wound Gasket-R for Azerbaijan Manufacturers, The product will supply to all over the world, such as: , , ,


  • NKG, back to back (shaft seal, MG12-MG1)

    Table of contents:

    Dismantling:
    00:00 Removing the pump housing
    02:41 Removing the impeller
    04:03 Removing the primary shaft seal
    05:15 Removing the secondary shaft seal

    Assembly:
    06:06 Fitting the secondary shaft seal
    08:36 Fitting the primary shaft seal
    10:31 Fitting the impeller
    11:41 Fitting pump housing

    15:04 Wear ring replacement

    Recorded: January 2010

    For more information please visit:

    https://www.grundfos.com/service-support.html


    5 Stars By from -

    5 Stars By from -

    Related Products