2017 China New Design Spiral Wound Gasket-CGI Export to Cologne

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2017 China New Design Spiral Wound Gasket-CGI Export to Cologne Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

dd

Technical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

2017 China New Design
 Spiral Wound Gasket-CGI Export to Cologne detail pictures


Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket

2017 China New Design Spiral Wound Gasket-CGI Export to Cologne, The product will supply to all over the world, such as: , , ,


  • Applications for Krytox™ lubricants go far beyond bearings and mechanical devices. Krytox™ TS4 Thread Sealant reduces the risk of thread damage, leaks, corrosion and chemical reactions, even in the most demanding applications. It is cost effective—a little bit goes a long way—and can help drive long lasting operational efficiencies for plastic and metal applications.

    Learn more at https://Krytox.com



    CM, CME (MG, MGE 71, 80, 90, 100 and 132)

    Table of contents:

    Dismantling:
    00:00 Removing the motor flange
    01:11 Removing the diverting disc, o-ring and bearing cover plate
    01:33 Removing fan cover, fan and the seal ring
    02:24 Removing the rotor

    Assembly:
    02:55 Fitting the rotor
    03:09 Fitting fan cover, fan and the seal ring
    04:38 Fitting the diverting disc, o-ring and bearing cover plate
    04:58 Fitting the motor flange

    Recorded: July 2009

    For more information please visit:

    https://www.grundfos.com/service-support.html


    5 Stars By from -

    5 Stars By from -

    Related Products