14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner to Macedonia Manufacturers
14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner to Macedonia Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials
14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner to Macedonia Manufacturers, The product will supply to all over the world, such as: , , ,
Sentinel Seal X Joint & Leak Sealer, which is applied externally, is a one component, ready to use, silicone sealant. It can be applied to screwed fittings, compression joints and gaskets to form a water and air tight seal. A well pasted cloth may be bound around burst and leaking pipes to form a temporary repair.
How to install the spring for the Spring energized seals? DSH Seals will show you.
By from -
By from -
