14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner for US Importers
14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner for US Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
14 Years Factory wholesale PTFE Graphite Packing with Aramid Corner for US Importers, The product will supply to all over the world, such as: , , ,
Loading of the internal diameter on a press fitting. The design of the tool was made by Camas. Possibility to process 8 different sizes from ø12 up to ø54 mm. The machine is able to process 1 piece every 3 seconds. The machine is completely automatic.
By from -
By from -