Professional Design Rubber Gasket/Washer – China Supplier

Short Description:

Rubber is the most cost-effective material to use where temperature and pressures are low and the chemical environment is mild. Different elastomers offer different mechanical and chemical properties. Cloth&metal inserted materials are better able to handle movement and high compression loads. Technical Data Sheet Material NR, NBR,SBR,BR,IR,CR,EPDM,VITON(FKM),SIR,SILICONE Hardness Silicone about 50~90 shore A, others about 60~90 shore A Temperature Resistance -40~+300℃ ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Professional Design Rubber Gasket/Washer – China Supplier Detail:

Rubber is the most cost-effective material to use where temperature and pressures are low and the chemical environment is mild. Different elastomers offer different mechanical and chemical properties. Cloth&metal inserted materials are better able to handle movement and high compression loads.

Technical Data Sheet

Material

NR, NBR,SBR,BR,IR,CR,EPDM,VITON(FKM),SIR,SILICONE

Hardness

Silicone about 50~90 shore A, others about 60~90 shore A

Temperature Resistance

-40~+300℃

Technology

Hot pressing or injection Molding

Second Processing

Vulcanizing/Deburring/silk-screen/Carving/Printing

Quality Control

Internal QC control

Product Feature

Oxidation, chemical, oil, acid, alkali, weather resistance

Colorful, anti-aging, good flexibility,good elasticity

Application Area

l Electron Components

l Medical Equipment

l Home Appliance

l Mechanical Equipment

l Office Facilities

l Aviation

l Construction

l Automobile


Product detail pictures:

Professional Design
 Rubber Gasket/Washer – China Supplier detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials

Professional Design Rubber Gasket/Washer – China Supplier, The product will supply to all over the world, such as: , , ,


  • Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?

    PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.

    I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.

    The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.

    See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.

    Mario Parodi [ Guitar ] plays:-

    Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
    Brahms: Cradle Song Op 49 no 4
    Debussy: Arabesca No 1; SB – Clair de lune


    5 Stars By from -

    5 Stars By from -

    Related Products