Online Manufacturer for PTFE Filament Braided Packing for Bandung Factory
Online Manufacturer for PTFE Filament Braided Packing for Bandung Factory Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
15Mpa |
25Mpa |
Shaft Speed |
12m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Online Manufacturer for PTFE Filament Braided Packing for Bandung Factory, The product will supply to all over the world, such as: , , ,
Have you been fighting a mystery creak, chirp, or other bizarre noise that can’t be tracked down? Watch BikeCo’s Joe Binatena go through the steps of correcting bearing interface. Take Joe’s advice and check the easy stuff first – but if you are still struggling to find the cause of your noise these steps may save you a lot of heartache, hours of searching, and potential damage on your frame.
This is the first in a series of videos touching on locating and theories on addressing mystery creaks.
By from -
By from -