Leading Manufacturer for PTFE Packing with Aramid Corner for Peru Factories
Leading Manufacturer for PTFE Packing with Aramid Corner for Peru Factories Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Leading Manufacturer for PTFE Packing with Aramid Corner for Peru Factories, The product will supply to all over the world, such as: , , ,
https://chalkpaintideas.com/1940s-antique-desk-rescued-and-lovingly-transformed-with-chalk-paint/ – Waxing the wood runners and wooden drawers to lubricate them to get drawers unstuck and make them slide easier in an antique desk refurbished with chalk paint. After this desk was painted with Annie Sloan chalk paint, it was time for the finishing touches, including waxing the wooden drawers with wood runners to lubricate them. Here is how I did it!
By from -
By from -