Factory supplied Spiral Wound Gasket-R to Armenia Factory
Factory supplied Spiral Wound Gasket-R to Armenia Factory Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
Factory supplied Spiral Wound Gasket-R to Armenia Factory, The product will supply to all over the world, such as: , , ,
https://www.durafix.com.mx Soldar aluminio ahora es mas facil que nunca! desde una lata hasta una placa, solo requieres un soplete de gas propano, mapp, acetileno etc. en segundos podras soldar piezas de aluminio, cobre, bronce, lamina galvanizada.
Durafix, crea una fuerte union mas resistente que el metal base, libre de porosidades y residuos, con ua apariencia similar al aluminio, no requiere fundente ni el uso de gases o maquinas especiales.
============================
Tensile Strength, lbs/sq. in.=47,000
Compression Strengt, lbs/sq. in.=60,000 – 75,000
Shear Strengt, lbs/sq. in.= 34,000
Charpy Impact Str, lbs/sq. in.= 4 ft/lb to break 1/4″ bar
Hardness (Brinell)= 100
Ductility Good= Good
Melting Point= 732°F – 390°C
Specific Gravity = 6.7
Density (lbs/cu. in.)= 0.25
Elongation (in 2″)= 3%
Coefficient of Linear Expansion= 15.4×10-6/°F
Electrical Conductivity= 24.9% of Cu
Thermal Conductivity= 0.24 cal/cu.cm/°C
============================
Entrega inmediata en todo Mexico.
============================
Music track: Adam Michaels Is There Anybody Out There
Powered by Freeplay Music
By from -
By from -
