ټول خبرونه

د سپرل زخم ګازکیټ

کور>محصولات>د سپرل زخم ګازکیټ

د فلج سیل مهر ګاسکیټ SS316 / SS304 ASME B16.20 سرپل زخم ګاسکیټ


Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...
 
                     

  • د FOB قیمت:                خبرې اترې
  • رسولو وړتیا:           10000 ٹکڑا / ٹکڑے په میاشت کې

  • بندر:                          Shanghai  Ningbo 

  • د پیسو اصطلاحات:        Western Union or PayPal,T/T, L/C
مونږ سره اریکه ونیسی

برخی

Spiral wound gasket consists of "V-shape"(or"W-shape")metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

فیچر

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

د محصولاتو ډول

gg

echnical Data Sheet

Product&Type

اندازه (ملي متر)

د تودوخې درجه (℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16 ~ φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16 ~ φ3200

- 150 + + 450 ℃

15

Spiral Wound Gasket filled with PTFE

 

φ16 ~ φ3200

- 200 + + 250 ℃

15

 د غوښتنلیک ساحه

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.

پوښتنه