Quality Inspection for Flexible Graphite Braided Packing for Korea Factories

Short Description:

The Flexible Graphite braided packing is made of an innovative expanded pure graphite yarn. The combination of other braided packing which is made of an innovative expanded pure graphite yarn. The combination of other braided packing installed with the excellent sealing capabilities of expanded pure graphite makes it the most effective sealing component. Technical Data Sheet   Rotating Reciprocating Valves Pressure 3Mpa 10Mpa 20Mpa Shaft Speed 20m/s rotary Temper...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Quality Inspection for Flexible Graphite Braided Packing for Korea Factories Detail:

The Flexible Graphite braided packing is made of an innovative expanded pure graphite yarn. The combination of other braided packing which is made of an innovative expanded pure graphite yarn. The combination of other braided packing installed with the excellent sealing capabilities of expanded pure graphite makes it the most effective sealing component.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

3Mpa

10Mpa

20Mpa

Shaft Speed

20m/s rotary

Temperature

-200℃~+455℃ atmosphere, +650℃ in steam

PH Range

0~14

 Application Area

It can be used to seal hot water, high temperature and pressure steam, heat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids, etc., except fewer strong oxidizer. It is a unique and universal sealing packing.


Product detail pictures:

Quality Inspection for
 Flexible Graphite Braided Packing for Korea Factories detail pictures


Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications

Quality Inspection for Flexible Graphite Braided Packing for Korea Factories, The product will supply to all over the world, such as: , , ,


  • Quick video describing the placement and use of the small seal/oring that comes in most racor fuel/water separators with the clear detachable bowl.



    This video shows the ATOM Flashcut dieless knife cutting machine nesting and cutting gasket sealing material.
    Although this can be cut on any of the ATOM range of Flashcut’s, this is the general standard size bed for this application, giving the operator the ability to be unloading one half of the machine, relaod blank material and nest, whilst the second half of the machine is cutting. When the first zone is completed then the cutting beam will move over too the second half and restart, allowing the operator to be a continous production cycyle.


    5 Stars By from -

    5 Stars By from -

    Related Products