Ordinary Discount PTFE Graphite Packing with Aramid Corner for Kenya Factories
Ordinary Discount PTFE Graphite Packing with Aramid Corner for Kenya Factories Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
Ordinary Discount PTFE Graphite Packing with Aramid Corner for Kenya Factories, The product will supply to all over the world, such as: , , ,
We were out filming Greg in his boat when he hit the wave behind the boat at the wrong angle and too fast. Boat speed was around 70 mph. Greg’s Life Vest and kill switch SAVED HIS LIFE. He was unconscious for about 10 minutes. As you can see the boat never turned over. Greg suffered a broken collarbone. I’m showing this in hopes that a lot of you Bass Boat Drivers have gotten lazy about putting your Vest on and hooking up your kill switch. All of you have hit a suprise wave from out of nowhere at speeds of 70 mph or more. Don’t let this happen to you.
By from -
By from -