China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer
China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer Detail:
Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.
Technical Data Sheet
|
Property |
Unit |
Result |
|||
|
A |
B |
C |
|||
|
Normal Conditions |
Hardness |
JIS Hs |
70~90 |
70~90 |
60~75 |
|
Elongations(min.) |
% |
60 |
60 |
80 |
|
|
Tensile Stress(min) |
Mpa |
16 |
16 |
16 |
|
|
Compressibility |
% |
50~60 |
50~60 |
60~75 |
|
|
Recovery |
% |
＞85 |
＞85 |
＞70 |
|
|
Permanentset |
% |
＜10 |
＜10 |
＜10 |
|
|
230°Cx24h hot air ageing |
Change of hardness(max) |
JIS Hs |
-5~+5 |
-5~+5 |
-5~+5 |
|
Change of Tensile Stress(max) |
% |
-15 |
-15 |
-15 |
|
|
Change of Elongation(max) |
% |
-20 |
-20 |
-20 |
|
|
Compression Permanentset |
175°Cx70h |
% |
≤20 |
≤20 |
≤20 |
|
Color |
|
|
Brown |
Black |
Red |
|
Applications |
Temperature Limited |
℃ |
-20~+250 |
-20~+200 |
-20~+200 |
|
Pressure Limited |
Mpa |
0~35 |
|||
|
Working Environment |
|
Strong Caustics, moderate acids, chlorine, gases, water, steam, hydrocarbons, hydrogen and aluminum fluoride except element fluorine and fusion sodium. |
|||
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
China Manufacturer for FEP Encapsulated O-Ring to Netherlands Manufacturer, The product will supply to all over the world, such as: , , ,
Custom Rolling machine can roll 20 gauge sheet metal to 50mm to 150mm diameter cylinders. This is 2 roller uses 1 large rubber roller pressed against a small mandrel. Benefits of this rolling technique are first, perfectly cylindrical finished product with no flat section near the edge unlike the conventional 3 roller machine. Removal of finished cylinder is easy because one side of the roller is automatically opens after the rolling cycle is finished.
Machine can be designed to roll tapered cylinders like motorcycle exhaust pipes, funnels and sheet metal pipe adapters.
By from -
By from -
