High Efficiency Factory NBR O-Ring to Zambia Manufacturers
High Efficiency Factory NBR O-Ring to Zambia Manufacturers Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
High Efficiency Factory NBR O-Ring to Zambia Manufacturers, The product will supply to all over the world, such as: , , ,
Request a Demo: https://www.megadyne.com/samples
https://www.megadyne.com/EZClean
Discover how vital pure PTFE is to creating the performance of the E-Z Clean® electrodes. E-Z Clean non-stick electrodes feature a proprietary polytetrafluoroethylene (PTFE) coating that reduces eschar buildup during surgical procedures, enabling surgeons to use lower power settings. Lower power settings mean less thermal necrosis to surrounding tissue and a further reduction in eschar build-up.
E-Z CLEAN PTFE = FASTER SURGERY
Save time and minimize cleaning disruptions during electrosurgery by using Megadyne’s E-Z Clean non-stick tips.
MODIFIED TIP ELECTRODES
HIGHEST PRECISION AND ENHANCED SAFETY FOR CONFINED-SPACE PROCEDURES
https://www.megadyne.com/ez_products.php
Modified tip electrodes are ideal for reducing the risk of alternate site thermal injuries in procedures where space is limited.
• Only 4 mm of the distal tip is exposed thus minimizing the likelihood of alternate site thermal injuries.
• Features new modified PTFE insulation that resists splitting in temperatures beyond 700° F.
• Proprietary E-Z Clean PTFE-coated tips save time by reducing eschar build-up.
• Reduced eschar build-up enables surgeons to use lower power settings.
PROTECTIVE NOSE CONE ELECTRODES
FOR ENHANCED SAFETY IN CONFINED-SPACE AND HIGHMOISTURE PROCEDURES
https://www.megadyne.com/ez_products.php
New protective nose cone electrodes provide patient safety in procedures performed in moisture-rich areas and confined spaces by minimizing the chance of alternate site injuries.
• Protective nose cone reduces risk of inadvertent thermal burns caused by moisture-induced alternate current pathways.
• Minimizes chances of moisture wicking into the hand piece.
• Features new modified PTFE insulation that resists splitting in temperatures beyond 700° F.
• Proprietary E-Z Clean PTFE-coated tips save time by reducing eschar build-up.
E-Z Clean PTFE vs. Stainless Steel
Eschar build-up on stainless steel cautery tips increases electrical resistance, creating the need for higher power settings. But higher power settings make electrosurgery less efficient and potentially more dangerous.
• Stainless steel tips require stopping and starting during procedures to repeatedly scrape off eschar buildup with a scratch pad.
• E-Z Clean PTFE green tips only require a wipe from a damp sponge to clean, thus saving valuable surgeon time and the expense of scratch pads.
E-Z Clean PTFE vs. Silicone
• During higher-power procedures silicone has a tendency to degrade.
• Little or no coating on the edge of a silicone blade causes current to be directed to the edges—thus producing uneven coagulation and varying depths of thermal necrosis.
• E-Z Clean PTFE tips are evenly coated with high-grade PTFE to ensure consistent coagulation.
E-Z Clean PTFE vs. Economy PTFE
E-Z Clean electrodes are coated with pure PTFE, while economy PTFE tips may use filler ingredients like polyurethane (an inexpensive PTFE substitute) to reduce manufacturing cost. In functional testing, economy tips did not perform to the level of Megadyne E-Z Clean electrodes.
• Polyurethane breaks down at temperatures commonly seen in electrosurgery.
• The dangers of polyurethane flaking in the human body are unknown. PTFE has an established patient safety record proven over 25 years.
• When economy PTFE tips flake, they allow eschar buildup, which can slow surgeons down and cost time and money in the OR.
Megadyne, the exclusive manufacturer of E-Z Clean non-stick PTFE Coated Electrosurgery Tips, offers a full line of Electrosurgical Products including:
Mega Power Electrosurgical Generator
https://www.megadyne.com/megapower.php
Mega Vac Smoke Evacuation
https://www.megadyne.com/megavac.php
Mega Soft® Reusable Patient Return Electrodes
https://www.megadyne.com/megasoft.php
Electrosurgical Pencils
https://www.megadyne.com/es_pencils.php
E-Z Clean Laparoscopic Electrodes
https://www.megadyne.com/laparoscopics.php
ACE Blade Cutting System
https://www.megadyne.com/ace.php
Bipolar Forceps
https://www.megadyne.com/bipolar.php
Suction Coagulators
https://www.megadyne.com/suct_coag.php
LLETZ Loop Electrodes
https://www.megadyne.com/lletz_loop.php
Learn more about the E-Z Clean family of electrodes.
https://www.megadyne.com/ez_electrodes.php
Question or Comment? Contact Us!
https://www.megadyne.com/contact.php
By from -
By from -
