Free sample for Expanded PTFE Tape Wholesale to Jeddah

Short Description:

Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media. Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance. Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured. l Easy use and replacement l Wi...


Product Detail

Product Tags

Related Video

Feedback (2)

We always get the job done being a tangible workforce making sure that we can easily give you the very best quality as well as finest selling price for O-ring , O Ring Mechanical Seal , Spiral Wound Gasket R , Being a young growing company, we might not the best, but we are trying our best to be your good partner.
Free sample for Expanded PTFE Tape Wholesale to Jeddah Detail:

Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.

Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.

Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.

l Easy use and replacement

l Wide service scope.

Technical Data Sheet

No.

 

Project

Technical Indexes

1

PH Range

0-14

2

Density

0.7-0.8g/cm3

3

Temperature resistance

-260-+260℃

4

High pressure resistance

20~25Mpa

5

Elongation

20~30%

6

Tensile strength

30~35Mpa

 

Regular Size

NO.

SIZE

NO.

SIZE

1

3mm*1.5mm*30m

15

16mm*4mm*10m

2

3mm*2mm*30m

16

20mm*3mm*5m

3

6mm*3mm*20m

17

20mm*4mm*5m

4

7mm*2.5mm*20m

18

20mm*5mm*5m

5

9mm*3mm*15m

19

20mm*7mm*5m

6

9mm*4mm*15m

20

25mm*4mm*5m

7

10mm*3mm*10m

21

25mm*5mm*5m

8

10mm*4mm*10m

22

25mm*8mm*5m

9

10mm*5mm*10m

23

25mm*10mm*5m

10

12mm*3mm*10m

24

30mm*3mm*5m

11

12mm*4mm*10m

25

30mm*4mm*5m

12

12mm*5mm*10m

26

40mm*4mm*5m

13

12mm*6mm*10m

27

50mm*4mm*5m

14

14mm*5mm*10m

28

100mm*0.5mm*10m

 

Application Area

It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.


Product detail pictures:

Free sample for
 Expanded PTFE Tape Wholesale to Jeddah detail pictures


Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials

We emphasize progress and introduce new solutions into the market each year for Free sample for Expanded PTFE Tape Wholesale to Jeddah, The product will supply to all over the world, such as: Greece , Florida , Toronto , Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.


  • This video will show you some tools to fix a leaking bathtub spout. Its an old house and simple things you can do to save water and cheap repairs to help save …



    The integrity of flanges is critical to the containment of fluids in a piping system. In our latest video, we demonstrate how to fully encapsulate flanges and bolt fastenings to protect against moisture ingress and prevent corrosion. Find out more: http://www.belzona.com/3412

    Insufficient external protection of corrosive areas can lead to rapid and extensive damage to the flanges and fastenings which will accelerate the deterioration of the system’s integrity. The Belzona 3412 encapsulation system can be applied to new or deteriorated equipment to provide outstanding long-term corrosion protection.

    Materials Used:

    To encapsulate this flange, we used Belzona 3412, Belzona 8411 (Release Agent), Belzona 9431 (Instant Bridging Tape) and Belzona 9311 (Reinforcement Sheet)

    How-to Guide:

    Step 1: Clean the surface of the pipe and flanged connections to remove all dirt, grease and other surface contaminants.
    Step 2: Thoroughly abrade the surface with abrasive paper (sand paper) or wire brush to remove all gloss and provide a good key for the Belzona coating.
    Step 3: Apply masking tape over the two bond areas to protect the pipe areas from accidental overspray.
    Step 4: To allow assess to bolts and flanges in the event of required maintenance, we recommend the application of Belzona 8411 by brush or spray. This also provides an optimum level of corrosion protection.
    Step 5: Once the Belzona 8411 is touch dry, remove the masking tape.
    Step 6: Re-apply fresh masking tape.
    Step 7: To seal the gap between the flange faces, cut a strip of Belzona 9341 to the correct width and apply over the gap.
    Step 8: Fit plastic caps over the nuts/bolts.
    Step 9: Empty the entire contents of the Belzona 3412 base and solidifier and thoroughly mix in the bowl provided for at least three minutes.
    Step 10: Using a spatula, transfer the mixed Belzona 3412 to the flange face and bolts.
    Step 11: Using long, light strokes, brush the material over the entire area ensuring it does not extend outside the prepared area.
    Step 12: While the first coat of Belzona 3412 is still wet, bed strips of Belzona 9311 around the circumference of both ends of the pipe and the flange.
    Step 13: Mix and apply the second coat of Belzona 3412

    Accessing the flanges and bolts during required maintenance:

    Step 1: Using a sharp knife, cut through the Belzona membrane in the gap between the flanges.
    Step 2: Carefully peel back the material and remove the bolt caps.
    Step 3: Once the inspection is complete, fold the Belzona 3412 back to its original position.
    Step 4: To re-seal the repair, mix a further quantity of Belzona 3412 and brush apply it onto the cut area around the flange incorporating Belzona 9311.

    To find your local Belzona products and services supplier please visit: http://www.belzona.com/en/about/disfinder.aspx

    Subscribe to our YouTube channel to explore our collection of How-To videos including:

    Leak Repair https://youtu.be/00dOkmL_omA

    Conveyor Belt Repair https://youtu.be/C1Wh1tluqS8

    A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Kim from Sheffield - 2016.04.28 15:45
    The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
    5 Stars By Polly from Malta - 2015.02.12 14:52

    Related Products

    WhatsApp Online Chat !
    function pcWhatsapp(){ document.getElementById("mo_whatsapp").setAttribute("class", "pc_whatsapp") } function moWhatsapp(){ document.getElementById("mo_whatsapp").setAttribute("class", "mo_whatsapp") } if( /Android|webOS|iPhone|iPad|iPod|BlackBerry|IEMobile|Opera Mini/i.test(navigator.userAgent) ) { moWhatsapp() }else{ pcWhatsapp() }