Factory source manufacturing Aramid Fiber Braided Packing with PTFE Impregnated Wholesale to Kyrgyzstan

Short Description:

Aramid fiber PTFE packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. This packing can bear higher pressure applications than other types of braided packing. Due to its steel like strength, this yearn can used separately or as back up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better. Technical D...


Product Detail

Product Tags

Related Video

Feedback (2)

With our loaded working experience and thoughtful products and services, we've got been acknowledged as a reputable supplier for most international buyers for Eptfe Tape , Ptfe Graphite Gland Packing , Spiral Wound Gasket With Centering Ring , Teamwork is encouraged at all levels with regular campaigns. Our research group experiments on various developments during the industry for improvement within the solutions.
Factory source manufacturing Aramid Fiber Braided Packing with PTFE Impregnated Wholesale to Kyrgyzstan Detail:

Aramid fiber PTFE packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. This packing can bear higher pressure applications than other types of braided packing. Due to its steel like strength, this yearn can used separately or as back up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

8Mpa

20Mpa

30Mpa

Shaft Speed

20m/s rotary

Temperature

-100℃~+280℃

PH Range

2~12

Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.


Product detail pictures:

Factory source manufacturing
 Aramid Fiber Braided Packing with PTFE Impregnated Wholesale to Kyrgyzstan detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket

We will make every effort to be outstanding and perfect, and accelerate our steps for standing in the rank of international top-grade and high-tech enterprises for Factory source manufacturing Aramid Fiber Braided Packing with PTFE Impregnated Wholesale to Kyrgyzstan, The product will supply to all over the world, such as: Turkmenistan , Hanover , Libya , We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.


  • How to replace the oil seal for the saginaw steering gearbox Pitman-arm shaft. Here we dis-assemble the gearbox to investigate what cause the oil seal to fail. We found the tension spring behind the rubber lip seal to be corroded and nearly broken. We were able to locate a new non-brand name oil seal with a different sealing lip profile, but the new seal became damage while installing into the saginaw casting. We reuse the old seal by replacing its tension spring from the new oil seal. We also lost a few video clips from this recording but we feel the video achieve its purpose of how to replace the oil seal for the saginaw steering gearbox. You should also see the first part of this series by
    CLICK HERE . https://www.youtube.com/watch?v=EaK_pc95Poo

    Part 2. https://www.youtube.com/watch?v=wlN-KDn-YCQ

    Part 3.https://www.youtube.com/watch?v=oX7zVcDEJqM

    CLICK HERE for Seal PART number

    The model 800(Nissan D600) incorporates a recirculating ball system in which steel balls act as a rolling thead between a steering worm-shaft and the rack-piston. Whenever a part which forms a sealing surface for an “o” ring is removed , the “o” ring seal should also be removed and replaced with a new seal. Whenever one of the pitman shaft or stub shaft seals are removed all adjacent seals should be removed and replaced with new seals. Lubricate all new seals with power steering fluid to ease assembly.

    CAUTION. USE THE PROPER TOOL TO SEPARATE ALL TIE ROD AND BALL JOINTS.

    Torque small 14mm hydralic line to 22-29lbs ft.
    Torque large 16mm hydralic line fitting to 29-36 lbs-ft.
    Thank you.

    Also see.
    https://www.youtube.com/watch?v=hdfWXfsEZz8 . part series on restoring vehicle front-end alignment and road safe.

    https://www.youtube.com/watch?v=3adLcniKrwA self packing a 4×4 front wheel hub bearing for lifetime operation.

    Troubleshooting why the vehicle DO NOT START.https://www.youtube.com/watch?v=YCZMhOta_pE

    please visit the channel Homepage for more in detail automotive repair and fix it video. Thank you.

    Special tools thanks to Stanely Bostitch company. Tool # 84-273 is 7″ or 178mm Circlip Pliers(Alicate para Anillo de Retencion)

    This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Alberta from Namibia - 2015.08.12 12:27
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Cornelia from Sri Lanka - 2015.08.12 12:27

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    WhatsApp Online Chat !
    function pcWhatsapp(){ document.getElementById("mo_whatsapp").setAttribute("class", "pc_whatsapp") } function moWhatsapp(){ document.getElementById("mo_whatsapp").setAttribute("class", "mo_whatsapp") } if( /Android|webOS|iPhone|iPad|iPod|BlackBerry|IEMobile|Opera Mini/i.test(navigator.userAgent) ) { moWhatsapp() }else{ pcWhatsapp() }