factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer

Short Description:

PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE. Technical Data Sheet   Rotating Reciprocating Valves Pressure 4Mpa 15Mpa 25Mpa Shaft Speed 22m/s rotary Temperature -100℃~+280℃ PH Range 2~12  Application Area It affords longer service life under severe conditions w...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer Detail:

PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

4Mpa

15Mpa

25Mpa

Shaft Speed

22m/s rotary

Temperature

-100℃~+280℃

PH Range

2~12

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.


Product detail pictures:

factory Outlets for
 PTFE  Packing with Aramid Corner to Greenland Manufacturer detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?

factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer, The product will supply to all over the world, such as: , , ,


  • Blade is made from a high quality of epoxy resins mixture, carbon and fiberglass. – Blade covered thin (1 millimeter) neoprene material with teflon layer. – Unique …



    Circular knife cutting machine for cutting hoses into gaskets and o-rings. For hoses tubes with suitable material properties, the »CCM 4 Gasket« offers an excellent possibility to produce gaskets with a circular knife. Depending on requirements, with each cut a plurality of seals can be cut, so that the production is increased significantly.

    Kreisschneidemaschine zum Schneiden von Flachdichtungen und O-Ringen. Für Schläuche mit geeigneten Materialeigenschaften bietet die »CCM 4 Gasket« eine exzellente Möglichkeit, Flachdichtungen mit dem Kreismesser zu schneiden. Je nach Anforderung werden bei jedem Schnitt gleich mehrere Dichtungen geschnitten, so dass die Produktion deutlich gesteigert wird.


    5 Stars By from -

    5 Stars By from -

    Related Products