factory Outlets for PTFE Gasket Supply to USA
factory Outlets for PTFE Gasket Supply to USA Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
Property | Unit | Result |
Density | g/cm3 | 2.18 |
Elongation at Break | % | 200~450 |
Tensile Strength | Mpa | 14~18 |
Bending Strength | Mpa | No Break |
Pressure Resistance | Mpa | 24 |
Tensile Modulus | Mpa | 393 |
Bending Modulus | Mpa | 490~586 |
Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
factory Outlets for PTFE Gasket Supply to USA, The product will supply to all over the world, such as: , , ,
The SSI / GRANOR XJS® Expansion Joint System is a revolutionary new concept in expansion joint construction and rehabilitation, combining a tough, impact resistant wear resistant polymer joint nosing and a rapid two part cure joint sealing system with high movement capacity. The total expansion joint system, which is cold applied with minimum specialised equipment, is specifically designed to provide a watertight, chemically resistant seal to accommodate high traffic loads and to remain pliable in cold and warm temperatures.
The Leg Band, made entirely of stretch material, has a soft, supple backing for added skin comfort. The elasticity and 2″ width of the leg band distribute compression evenly around the thigh to minimize circumferential pressure.
All Dale Hold-n-Place® Foley Catheter Holders feature patented locking systems that securely anchor the catheter in place, reducing the risk of urethral erosion, bladder spasms and trauma. The locking devices speed up application and simplify adjustment.
The holders can be used with equal effectiveness on all Foley catheters including Teflon, silver and silicone coated catheters. Latex-free.
In response to clinical concerns regarding patient hypersentivity, the Dale Foley Catheter Holders contain no latex.
By from -
By from -