Customized Supplier for NBR O-Ring Supply to Sudan
Customized Supplier for NBR O-Ring Supply to Sudan Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Customized Supplier for NBR O-Ring Supply to Sudan, The product will supply to all over the world, such as: , , ,
https://bhptemp.mypcat.com/gv-cotton-mills/ Established in the year 2004, our organization holds a superior rank in the market for manufacturing, supplying and exporting variety of Yarns. The offered range of yarn encompasses Colored Yarn (Eco Friendly), Bleached White Yarn (Eco Friendly), Mop Yarn (High Absorbent), Cotton Yarn and Duster Cloth Yarn/Condenser Carding Yarn. Developed employing latest machinery, these yarns are widely used for knitting and weaving applications. Besides, our offered cotton yarns can be used in making high quality denim, bed spreads towels and mattresses. Our offered range of yarns is in high demand of our clients for its eco-friendly nature and versatile applications. Available in various grades, these yarns are at relatively advantageous position in the market for their exceptional strength and durability.
I built a physical deposition chamber, for now it’s just evaporative deposition but I plan on adding a few other variants. The thin films created can be used in many ways.
The chamber still has a ton of space leftover and I have some more equipment coming so hopefully I can do more interesting things.
Sorry there’s no footage of lathing the feedthroughs, they worked nice with a cut o-ring and some heat shrink. Make sure you cut a slot down the holding screw threads to vent behind em. The 2 copper feedthroughs allow (with a center tap) 2 tungsten boats with different metals so I can avoid opening the chamber in a multi layer coating.
The pump down takes about 45 min. to get to 10e-5. I can use a small steel hemisphere with a kf40 hose on the top for use with a secondary high vacuum chamber. The shutter was aluminum flashing with some steel stuck on one side so a neodymium magnet on the outside of the bell jar could move it around without a feedthrough.
This build was really fun
I got everything from mcmaster, K.j lesker, ebay and what I already had
This did cost a bit to make:
diffusion pump- $160
mechanical pump-$140
plate- $270 (ouch!)
valves- $90
gauges- $200
misc vacuum stuff -$120
bell jar – $140 (stupid)
other stuff – maybe $100?
I recommend you check out https://www.youtube.com/user/bkraz333
he has done some neat stuff with his setup and a bunch of other things
Warning: Something might be dangerous
Consider supporting me and my projects on patreon! https://www.patreon.com/Bennbuilds
By from -
By from -
