2017 wholesale price PTFE Packing with Aramid Corner for Sri Lanka Factories
2017 wholesale price PTFE Packing with Aramid Corner for Sri Lanka Factories Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
2017 wholesale price PTFE Packing with Aramid Corner for Sri Lanka Factories, The product will supply to all over the world, such as: , , ,
LIQUI MOLY Oil Additive (#1011)
The MoS2 low-viscosity engine oil creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits: Significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties.
Intended use:
Suitable for all commercial motor oils in petrol and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Our dosage recommendation: add from 3 – 5 % to motor oil. For motorcycles with wet clutches, add maximum 2 % of the oil filling volume.
More information: https://www.liqui-moly.de/liquimoly/produktdb.nsf/id/en_1011.html?OpenDocument&land=GB&voilalang=e&voiladb=web.nsf
By from -
By from -