15 Years Manufacturer Reinforced Flexible Graphite Gasket for Belgium Manufacturers
15 Years Manufacturer Reinforced Flexible Graphite Gasket for Belgium Manufacturers Detail:
The reinforced flexible graphite composite gasket is composed of pressed metal sheet and flexible graphite grain after pressing and cutting.
1.Characteristic
Reinforced graphite gasket has perfect corrosion resistance, high &low temperature resistance, excellent elastic resilience, good strength. It can be cut into complex shape. Reinforced graphite gasket with inner &outer coating keeps all the excellent characteristics of itself, besides, it could be easily installed, disassembled, undamaged, meanwhile can prevent from medium corrosion, improve the pressure resistance.
2.Technical Data Sheet
Reinforced Material |
Pressure Resistance |
Temperature |
Elongation(%) |
Recovery(%) |
|
Oxidizing Environment |
Non-Oxidizing |
||||
CS Reinforce Sheet |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
SS304,SS316 Reinforced Sheet |
≥48 |
-240-450 |
-200-600 |
30-35 |
15-30 |
SS304,SS316 Sheet |
≥48 |
-240-450 |
-200-600 |
30-40 |
10-15 |
Ss304, Mesh Sheet |
≥48 |
-240-450 |
-200-600 |
40-50 |
15-20 |
Reinforced Material |
Breathable (cm3/min) |
Leakage |
Seal Constant |
||
N2 m1/hr |
Bumming oil A |
“M” |
“Y” |
||
CS Reinforce Sheet |
<=0.8 |
30 |
<0.5 |
3.0 |
9000 |
SS304,SS316 Reinforced Sheet |
<=0.8 |
60 |
<0.5 |
2.5 |
4000 |
SS304,SS316 Sheet |
<=0.4 |
35 |
<0.5 |
2.0 |
900 |
SS304, Mesh Sheet |
≥1.0 |
70 |
<0.5 |
3.0 |
5000 |
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
15 Years Manufacturer Reinforced Flexible Graphite Gasket for Belgium Manufacturers, The product will supply to all over the world, such as: , , ,
Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.
If your water heater’s drain valve is leaking, or doesn’t allow a good water flow while flushing the tank, it’s time to replace the valve. This is a relatively easy job you can do yourself in about 30 minutes.
This video shows detailed step-by-step procedure for how to replace a drain valve on a gas or electric hot water heater.
Tools you’ll need
Replacement drain valve
Adjustable wrench
Pipe sealer or Teflon tape
Rags or towels
WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.
By from -
By from -