11 Years Factory wholesale Spiral Wound Gasket-R to Cyprus Importers
11 Years Factory wholesale Spiral Wound Gasket-R to Cyprus Importers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
11 Years Factory wholesale Spiral Wound Gasket-R to Cyprus Importers, The product will supply to all over the world, such as: , , ,
auto sleeve packaging machine, sleeve shrink wrapping machine, bundling machine, auto PE sleeve wrapper,Auto Sleeve Packager (with trays)+ PE Shrink Tunnel are suitable for the shrink package of various bottles or cans with trays (half boxes), such as Pet bottles of the mineral water Glass bottles of the beer Beverage bottlesPop cans and so on.
It works with the (PE) constant shrink tunnel to do the whole working process automatically, that is auto feeding sleeve wrapping ealing and cutting shrinking and cooling. Applicable to the package of PE or PVC shrink film
It adopts AIRTAC cylinder OMRON programmable PLC ROKO photoelectric switch and other famous electrical units.
The heating cutter is coated with TEFLON to prevent sticking to the film.
Auto protection function avoid cut the products mistakenly and protect the operator at the same time.
Max packing size L600XW320XH300mm
Packing speed 8-15pcs/minute
Sealing and cutting time/temperature 0.5-1.5S/normal
By from -
By from -
